Solid End Wire Brush – Brass

Description

Solid end brushes have densely packed bristles that work at the tip, ideal for cleaning spot faces, recesses and small flat areas. Brass wire is softer than steel and non-sparking, so it cleans without marking most metals.

1/2″, 3/4″ and 1″ diameters, .008″, .014″ and .020″ wire, 1/4″ shank, max 20,000 RPM. Packs of 12 or 48.

Solid End Wire Brush – Brass: overview

Solid end wire brushes in brass have a dense brass tuft on a 1/4” shank. Brass is softer than steel and non-sparking, so it cleans without scratching softer metals.

Specifications

• Part numbers: 99450 to 99530 (9 sizes)
• Brush diameter: 1/2”, 3/4”, 1”
• Wire diameter: 0.008”, 0.014”, 0.02”
• Shank: 1/4”
• Max rpm: 20000
• Material: Brass
• Pack quantity: 12, 48

See the size table above for prices and the full part number list.

Typical applications

• Deburring and edge finishing on small machined parts
• Cleaning inside blind holes, pockets and counterbores
• Jewelry, mold, aerospace and medical component finishing
• Spot cleaning and surface prep with a die grinder or drill

Choosing the right size

Use a 1/4” or 1/8” shank to match your collet, and stay under the listed maximum RPM. End brushes reach the bottom of holes; cup brushes cover flat areas; wheel brushes work edges and outside surfaces.

Made in the USA, custom sizes available

Hight Brush makes industrial brushes in San Antonio, Texas. If you need a diameter, length, wire or fill material that is not listed, we build custom brushes to your drawing or sample. Request a custom quote with the size, material and quantity you need.