Description
These brushes clean both the side walls and the bottom of square blind holes and pockets in a single pass, removing chips, burrs and residue.
Diameters from 1″ to 2-1/4″, .006″ and .010″ wire, 1/4″ shank, max 4,500 RPM.
Power Brushes for Square Blind Holes – Side and Bottoming: overview
Power brushes for square blind holes clean both the side walls and the bottom of blind holes and pockets. They come in 1” to 2 1/4” diameters with .006” or .010” wire.
Specifications
- Part numbers: SB161 to SB175 (8 sizes)
- Brush diameter: 1”, 1 1/16”, 1 1/4”, 1 1/2”, 1 3/4”, 1 7/8”, 2”, 2 1/4”
- Wire diameter: .006”, .010”
- Overall length: 3 1/4”, 3 3/8”, 3 7/8”, 4”
- Shank: 1/4”
- Max rpm: 4500
- Pack quantity: 1, 6
See the size table above for prices and the full part number list.
Typical applications
- Deburring and edge finishing on small machined parts
- Cleaning inside blind holes, pockets and counterbores
- Jewelry, mold, aerospace and medical component finishing
- Spot cleaning and surface prep with a die grinder or drill
Choosing the right size
Use a 1/4” or 1/8” shank to match your collet, and stay under the listed maximum RPM. End brushes reach the bottom of holes; cup brushes cover flat areas; wheel brushes work edges and outside surfaces.
Made in the USA, custom sizes available
Hight Brush makes industrial brushes in San Antonio, Texas. If you need a diameter, length, wire or fill material that is not listed, we build custom brushes to your drawing or sample. Request a custom quote with the size, material and quantity you need.


Reviews
There are no reviews yet.