Double Stem Double Spiral Abrasive Tube Brush – Silicon Carbide

Description

These abrasive brushes are great for holes, pipes, tubes, auto remanufactured parts, valves, surface finishing. Grits available. 600/super fine, 320/xtra fine, 180/ very fine, 80/medium. Call for special sizes and grits.

Double Stem Double Spiral Abrasive Tube Brush – Silicon Carbide: overview

Double stem double spiral abrasive tube brushes use silicon carbide abrasive filament on a stiff double stem. They deburr and finish bores aggressively while staying flexible enough to follow the bore.

Specifications

• Part numbers: 16100 to 16320 (23 sizes)
• Brush diameter: 1/4”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”, 1”, 1 1/8”, 1 1/4”, 1 1/2”
• Brush length: 2”, 2 1/2”
• Overall length: 5”, 5 1/2”
• Stem size: .095”, .125”, .162”, .208”, .237”
• Grit: 80, 120, 320
• Grade: Course, Fine, Xtra Fine
• Material: Silicon Carbide
• Pack quantity: 6, 12

See the size table above for prices and the full part number list.

Typical applications

• Deburring and finishing cross-holes and bores
• Light honing and plateau finishing of cylinders
• Cleaning and polishing hydraulic and pneumatic components
• Removing machining marks inside valve bodies

Choosing the right size

Choose grit by the finish you need: coarser grit removes burrs faster, finer grit leaves a smoother surface. Size the brush slightly larger than the bore and run it with cutting oil when possible.

Made in the USA, custom sizes available

Hight Brush makes industrial brushes in San Antonio, Texas. If you need a diameter, length, wire or fill material that is not listed, we build custom brushes to your drawing or sample. Request a custom quote with the size, material and quantity you need.