Description
These double spiral double stem and round shank collet ready brushes are very aggressive. These brushes have a more dense surface area anf great for removing burrs, welds and heavy contamination from pipes cylinders and holes. Available in Carbon Steel and Stainless Steelother fills available, Brass, Nylon, abrasive, etc. call for special sizes and fill material. Call for special sizes and brush fill.
Double Stem Double Spiral Twisted Tube Brush – Carbon Steel: overview
Double stem double spiral tube brushes in carbon steel wire are among the stiffest and densest twisted brushes made. Two stems and two spirals of wire give aggressive cleaning of heavy deposits in tubes, cylinders and bores.
Specifications
- Part numbers: 36500 to 36720 (22 sizes)
- Brush diameter: 1/4”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”, 1”, 1 1/8”, 1 1/4”
- Brush length: 1 1/2”, 2”, 2 1/2”
- Overall length: 4”, 5”, 5 1/2”
- Bristle diameter: .005”, .006”, .010”
- Stem diameter: .095”, .125”, .162”, .208”, .237”
- Material: Carbon Steel, Stainless Steel
- Pack quantity: 6, 12
See the size table above for prices and the full part number list.
Typical applications
- Deburring cross-drilled and intersecting holes after machining
- Cleaning threads, bores and ports in valve bodies and manifolds
- Removing chips, scale and residue from tubes and fittings
- Surface prep before plating, welding or bonding
Choosing the right size
Choose a brush diameter slightly larger than the bore, about 10 to 20 percent oversize, so the filament stays in contact with the wall. Finer wire leaves a smoother finish; heavier wire removes burrs and scale faster.
Made in the USA, custom sizes available
Hight Brush makes industrial brushes in San Antonio, Texas. If you need a diameter, length, wire or fill material that is not listed, we build custom brushes to your drawing or sample. Request a custom quote with the size, material and quantity you need.


Reviews
There are no reviews yet.