Description
Flared end brushes spread at the tip for a wider cleaning face, good for removing rust, scale and paint and for blending edges on flat and contoured surfaces.
Stainless steel wire, 1″ to 4″ diameters, .006″ to .020″ wire, 1/4″ pilot. Max RPM 15,000 to 20,000 depending on size.
Flared Wire End Brush: overview
Flared wire end brushes have wire that flares out at the tip to cover a wider area than a solid end brush. They are used in die grinders for cleaning weld areas and surfaces around holes.
Specifications
- Part numbers: S21759 to S21834 (16 sizes)
- Brush diameter: 1”, 1 1/4”, 1 1/2”, 2 3/4”, 3”, 4”
- Bristle diameter: 0.006”, 0.008”, 0.0104”, 0.02”
- Material: Stainless Steel
- Pilot diameter: 1/4”
- Max rpm: 15000, 20000
- Pack quantity: 6, 12
See the size table above for prices and the full part number list.
Typical applications
- Deburring and edge finishing on small machined parts
- Cleaning inside blind holes, pockets and counterbores
- Jewelry, mold, aerospace and medical component finishing
- Spot cleaning and surface prep with a die grinder or drill
Choosing the right size
Use a 1/4” or 1/8” shank to match your collet, and stay under the listed maximum RPM. End brushes reach the bottom of holes; cup brushes cover flat areas; wheel brushes work edges and outside surfaces.
Made in the USA, custom sizes available
Hight Brush makes industrial brushes in San Antonio, Texas. If you need a diameter, length, wire or fill material that is not listed, we build custom brushes to your drawing or sample. Request a custom quote with the size, material and quantity you need.


Reviews
There are no reviews yet.