Solid End Wire Brush – Stainless Steel

Description

These end brushes are great for cleaning, Rubber , Plastic, Molds, Rust , welds and Burrs. Available in Carbon Steel, Stainless Steel and Brass

Solid End Wire Brush – Stainless Steel: overview

Solid end wire brushes in stainless steel have a dense, flat-ended tuft of wire on a 1/4” shank. They spot-clean and deburr surfaces and the bottom of holes without contaminating stainless or aluminum.

Specifications

• Part numbers: 99250 to 99370 (13 sizes)
• Brush diameter: 1/2”, 3/4”, 1”, 1 1/8”
• Wire diameter: 0.006”, 0.0104”, 0.014”, 0.02”
• Shank: 1/4”
• Max rpm: 20000
• Material: Stainless Steel
• Pack quantity: 12, 48

See the size table above for prices and the full part number list.

Typical applications

• Deburring and edge finishing on small machined parts
• Cleaning inside blind holes, pockets and counterbores
• Jewelry, mold, aerospace and medical component finishing
• Spot cleaning and surface prep with a die grinder or drill

Choosing the right size

Use a 1/4” or 1/8” shank to match your collet, and stay under the listed maximum RPM. End brushes reach the bottom of holes; cup brushes cover flat areas; wheel brushes work edges and outside surfaces.

Made in the USA, custom sizes available

Hight Brush makes industrial brushes in San Antonio, Texas. If you need a diameter, length, wire or fill material that is not listed, we build custom brushes to your drawing or sample. Request a custom quote with the size, material and quantity you need.