Stringer Bead Pipeline Brush

Description

Stringer bead brushes are narrow knot wheels made for the pipeline industry, cleaning between passes on root and hot pass welds and removing scale.

4″ to 7″ diameters, 5/8″-11 arbor, .020″ wire, in stainless or steel.

Stringer Bead Pipeline Brush: overview

Stringer bead pipeline brushes are narrow, heavy-duty knotted wire wheels made to clean between weld passes on pipelines and structural welds. The thin face gets into the root and between beads without widening the groove.

Specifications

• Part numbers: 94655 to 94745 (10 sizes)
• Size × thread: 4 x 5/8-11, 4 1/2 x 5/8-11, 5 x 5/8-11, 6 x 5/8-11, 7 x 5/8-11
• Wire size: 0.02”
• Material: Stainless, Steel
• Max rpm: 12500, 15000, 20000
• Pack quantity: 1, 6

See the size table above for prices and the full part number list.

Typical applications

• Removing rust, paint and mill scale from steel
• Cleaning weld seams and stringer-bead passes on pipelines
• Edge blending and deburring on fabricated parts
• Surface prep before coating or painting

Choosing the right size

Check the arbor or thread size of your grinder or drill, then never exceed the brush’s maximum RPM. Knotted (twisted) wire is more aggressive; crimped wire is more flexible and gives a finer finish.

Made in the USA, custom sizes available

Hight Brush makes industrial brushes in San Antonio, Texas. If you need a diameter, length, wire or fill material that is not listed, we build custom brushes to your drawing or sample. Request a custom quote with the size, material and quantity you need.