Knot Wheel Brush – Standard Twist

Description

Knot wheel brushes remove rubber, scale, paint and rust and are also used for deburring. The twisted knots make them more aggressive than crimped wire.

3″ to 8″ diameters with 5/8″-11 or 7/8″ arbor, .014″ to .025″ wire, in stainless or steel.

Knot Wheel Brush – Standard Twist: overview

Standard twist knot wheel brushes have wire twisted into tight knots for fast, aggressive cleaning. They are used on angle grinders and bench grinders to strip rust, scale, paint and weld spatter from steel.

Specifications

• Part numbers: 96125 to 96315 (20 sizes)
• Size × thread: 3 x 7/8AH, 4 x 5/8-11, 4 x 7/8AH, 4 1/2 x 5/8-11, 6 x 5/8-11, 6 x 7/8AH, 7 x 5/8-11, 8 x 7/8AH
• Wire size: .014”, .020”, .025”
• Material: Stainless, Steel
• Max rpm: 9000, 15000, 20000, 25000
• Pack quantity: 1, 6

See the size table above for prices and the full part number list.

Typical applications

• Removing rust, paint and mill scale from steel
• Cleaning weld seams and stringer-bead passes on pipelines
• Edge blending and deburring on fabricated parts
• Surface prep before coating or painting

Choosing the right size

Check the arbor or thread size of your grinder or drill, then never exceed the brush’s maximum RPM. Knotted (twisted) wire is more aggressive; crimped wire is more flexible and gives a finer finish.

Made in the USA, custom sizes available

Hight Brush makes industrial brushes in San Antonio, Texas. If you need a diameter, length, wire or fill material that is not listed, we build custom brushes to your drawing or sample. Request a custom quote with the size, material and quantity you need.